Many people ask that “why is my internet so slow at&t” or not working. Then in this article, I will show you how to fix the error.
1. What causes my at&t broadband not working?
Usually due to the following reasons
* Service Outage or Maintenance:
AT&T has millions of subscribers under its belt. So, it’s typical or normal for them to repair or have their towers and services under maintenance.
If you check the information from friends and social networks and see that, what you need to do is wait for the AT&T system to recover.
* Billing Problems:
A lot of AT&T subscribers report that they don’t get notifications and alerts because it’s usually sent to the wrong email, to the incorrect mailbox, etc.
For this, what you have to do is to check your account with AT&T and see if this is what’s causing the issue.
* Hardware Issues:
It could be what’s causing your internet not to work appropriately. The fix is to check and assess everything from the wires and cables, the antenna (including internal antenna) – to the complete gateway or modem.
The above are mainly 3 main causes of at&t broadband not working devices – OK and here’s how to FIX them
2. How to Fix at&t broadband not working?
* Restart your AT&T modem as well as your WiFi router
The advice that is the most out-of-date “Have you tried turning it off and on again?” isn’t just a light-hearted question. It’s one of the most effective methods for resetting any old piece of electronics, including modems and routers. This will assist you in getting it up and running in a timely manner.
Simply turning your gateway on and off again will reboot it. This will help you to resolve any minor bugs that are slowing down the performance of your router. Unplug your modem/router from the power source for 2 minutes, then plug it back in. Rebooting your modem/router, like rebooting a computer, is essentially normal maintenance that should be done more frequently than you think.
* Run a speed test on the internet
You’re probably being duped, and you want to be sure you’re getting the speed you’re paying for. During peak traffic hours in your neighborhood, depending on the type of connection you have, DSL or Fiber, these speeds may vary. Check the internet speeds at different times of the day to obtain a more accurate picture of the speed you’re obtaining.
* Check for Hardware Issues and Damages
Check and assess your wires and cables first. Then, see if there’s anything wrong with the ports and jacks where you connect the cables.
Another thing you want to check is the wall plug or the outlet to where it’s getting its power. It might not be supplying it with the appropriate amount of electricity.
It won’t be a problem at all if you work your way to Fix the error – and surely you already have the answer to the question I posed in the title, right? “Why is my at&t broadband not working?“. However, if you try all the above methods and the device is not stable, it is most likely due to a hardware failure and you need a technician to fix them.